| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR CONTAINER ROOF GUTTER AND BOTTOM RAIL CHANNEL | |
| Material Specification | |
| Thickness | 2.0mm |
| Material | GI |
| Yield strength | 250MPa |
| Width | 59 to 99 width adjustable |
| Machine Components | |
| 5Ton*600mm Simple Decoiler | |
| Type | No power |
| Load capacity | Max.5Tons |
| Coil Inner-diameter | 510±30mm |
| Coil width | Max.600mm |
| Coil outer-diameter | Max.1500mm |
| Option for Decoiler | 5Ton*600mm Hydraulic Decoiler |
| Pre-leveling and Feed-in Device | |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set, Manual control | |
| Roll Forming Machine | |
| Driving system | Gear/Chain |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Option for roller material | Cr12Mov |
| Shafts Diameter | Φ60mm |
| Motor to drive | 18.5KW |
| Motor for size changing | 1.5KW |
| Line speed of rollformer | Approx. 20m/min or customized |
| Hydraulic Post Punching & Cutting Device | |
| Punching & Cutting | Stop to punch, stop to cut |
| Cutting type | Slug breaker |
| Quantity of punching moulds | Two sets |
| Quantity of cutting moulds | One set |
| Punching & Cutting tool material | Cr12Mov, heat treatment |
| Hydraulci pump motor | 11KW |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±1mm |
| Control Voltage | 24V |
| Product Rack | 6 meters×1 |
){kind=link}