| Tile Type: | Gi, PPGI, Aluminum,Stainless Steel,Colored Steel |
|---|---|
| Certification: | CE, SGS |
| Condition: | New |
| Customized: | Customized |
| Usage: | Roof |
| Transmission Method: | Gear/Sprocket, Gear Box , Toroidal Worm Box |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | DUAL LEVEL ROLL FORMING MACHINE FOR YX18-76-1064 ROOFING AND YX10-107.5-1075 CLADDING | |
| Drawing | |
| Material Specification | |
| Thickness | 0.4mm to 0.7mm |
| Effective width | 1064/1075mm |
| Feeding width | Approx.1250mm |
| Material | PPGI, GI |
| Yield strength | 245MPa |
| Machine Components | |
| 5Ton*1250mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max. 1600mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Dual Level Entry Rollers and Manual Pre-shearing Device | |
| Working thickness | Up to 0.8mm |
| Function | Smart cut control, to cut off the end of the final piece of sheet only |
| Option | Hydraulic pre-shearing device |
| Dual level roll forming machine | |
| Driving system | Gear/sprocket |
| Option for driving system | Gear box or toroidal worm box |
| Dual level forming station | Upper level 20 stations, down level 21 stations |
| Roller material | 45# steel, CNC lathes, hard chrome coated |
| Option for roller material | Cr12, Cr12Mov |
| Shafts Diameter | Φ75mm |
| Main motor | 7.5KW |
| Line speed of rollformer | Approx. 18-20m/min or customized |
| Hydraulic Cutting Device | |
| Cutting type | No Blanking cut |
| Cutting tool material | Cr12, heat treatment |
| Hydraulci pump motor | 4KW |
| PLC Control System | |
| Function | Control the quantity & cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Delta/Schneider |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm or customized |
| Control Voltage | 24V |
| Product Rack | Un-powered, three units |
| Option | Please refer to Stacker on home page |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}