| Customization: | Available |
|---|---|
| Tile Type: | Gi, PPGI, Aluminum,Stainless Steel,Colored Steel |
| Certification: | CE, SGS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR SHELF PROFILE | |
| Drawing | |
| Material Specification | |
| Thickness | 0.8mm to 1.2mm |
| Material | GI, PPGI |
| Yield strength | Q235 |
| Machine Components | |
| 5T*700mm Hydraulic Decoiler With Coil Car | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil width | Max.700mm |
| Coil Inner-diameter | 510±30mm |
| Coil outer-diameter | Max.1300mm |
| With coil car, motor: 1.5KW | |
| Up/down stroke of coil car: Max. 300mm | |
| Backward and forward stroke of coil car: Max. 1000mm | |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Powered Feed-in & Hydraulic Punching notch and holes & Pre-cutting Device | |
| Powered Feed-in Device | Servo motor : 2.0KW |
| Material of Punching tool and cutting tool | Cr12, heat treatment |
| Hydraulic Station | 11KW |
| Powered Conveyor 1 | |
| Motor | 0.75KW |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 24stations |
| Roller material | 45# steel, hard chrome coated |
| Shafts Diameter | Ø75mm |
| Motor to drive | 11KW, frequency speed control |
| Motor for size changing | 1.5KW |
| Powered Conveyor 2 | |
| Motor | 0.75KW |
| Hydraulic Bending Device 1 | |
| Function | For bending the tail of the profiled sheet |
| Positioning | By pneumatic pin |
| Hydraulic station | Shear with Pre-cutting Device |
| Powered Conveyor 3 | |
| Motor | 0.75KW |
| Hydraulic Bending Device 2 | |
| Function | For bending the tail of the profiled sheet |
| Positioning | By pneumatic pin |
| Hydraulic station | Shear with Pre-cutting Device |
| Powered Conveyor 4 | |
| Motor | 0.75KW |
| PLC Control System | |
| Function | Control size changing and bending automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm |
| Control Voltage | 24V |
){kind=link}