| Customization: | Available |
|---|---|
| Tile Type: | Gi, PPGI, Aluminum,Stainless Steel,Colored Steel |
| Certification: | CE, SGS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR YX150-125 PROFILE | |
| Drawing | |
| Material Specification | |
| Thickness | 2.5mm |
| Feeding width | Approx 425mm |
| Material | GI |
| Yield strength | 235MPa to 350MPa |
| Machine Components | |
| 5Ton*600mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner-diameter | 510±30mm |
| Coil outer-diameter | Max.1600mm |
| Coil width | Max.600mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Power Feed-in Device and Pre-leveling Device | |
| Servo motor to drive | 5KW |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set, Manual control | |
| Hydraulic Pre-shearing device and Pre-punching device | |
| Function of pre-shearing devic | Smart cut control, to cut off the end of the final piece of sheet only |
| Hydraulic punching cyliner | 5 units |
| Cutting blade material | Cr12, heat treatment |
| Punching tool material | Cr12Mov, heat treatment |
| Hydraulic pump motor | 11KW |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 18 stations |
| Roller material | Cr12, heat treatment |
| Shafts Diameter | Φ75mm |
| Motor to drive | 18.5KW, frequency speed control |
| Production speed | Approx. 8m/min or customized |
| Hydraulic Post Cutting | |
| Cutting type | Slug breaker |
| Cutting blade material | Cr12Mov, heat treatment |
| Hydraulic station | Share the same hydraulic station with pre-punching device |
| PLC Control System | |
| Function | Control the quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm |
| Control Voltage | 24V |
| Product Rack | 6 meters×1 |
| End flare Adjusting Device | |
| Length | 4 meters |
| Hydraulic station | 4KW |
){kind=link}