| Customization: | Available |
|---|---|
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
| Certification: | CE, SGS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR C23×41PROFILE | |
| Material Specification | |
| Thickness | 3.0mm |
| Material | GI |
| Yield strength | 250MPa |
| Machine Components | |
| 1.5Ton*300mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 2.2KW pump motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.1.5Tons |
| Coil inner-diameter | 400-580mm |
| Coil outer-diameter | Max.1600mm |
| Coil width | Max.300mm |
| Feed-in and Pre-leveling Device | |
| Feed-in Rollers | |
| Pre-Level Device with 3 over 2 shafts to remove the Coil-set, Manual control | |
| Hydraulic Pre-notching and Pre-punching Device | |
| Quantity of hydraulic cylinders | Two sets |
| Notching and punching mould material | Cr12, heat treatment |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 22 stages to form |
| Roller material | GCr15, heat treatment, hard chorme coated |
| Shafts Diameter | Φ75mm |
| Main motor | 15KW×2, frequency speed control |
| Line speed of roll former | 15m/min |
| Hydraulic Post Cutting Device | |
| Cutting type | Slug breaker |
| Cutter material | Cr12, heat treatment |
| Hydraulic station | 7.5KW |
| PLC Control System | |
| Function | Control quantity and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm or customized |
| Control Voltage | 24V |
| Product Rack | un-powered, 3 meters |
){kind=link}