| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR BOX BEAM PROFILE | |
| Material Specification | |
| Thickness | 1.5mm to 2.0mm |
| Size | C48.5/68.5/88.5/108.5/128.5/138.5/148.5/158.5*37*40*13 |
| Yield strength | 550MPa |
| Machine Components | |
| 5Ton*650mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil Inner-diameter | 510±30mm |
| Coil width | Max.650mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Pre-leveling Device | |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set, Manual control | |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 16 stages |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Shafts Diameter | Φ75mm |
| Motor to drive | 18.5KW, frequency speed control |
| Motor for size changing | 1.5KW×1+0.75KW×1 |
| Line speed of rollformer | Approx. 18m/min or customized |
| Hydraulic Multi-size Cutting Device | |
| Cutting type | Multi-size cutting, slug breaker |
| Cutting blade material | Cr12, heat treatment |
| Hydraulic pump motor | 11KW |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm |
| Control Voltage | 24V |
| Pneumatic Unloading Rack | un-powered, 6 meters long |
){kind=link}