| Customization: | Available |
|---|---|
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
| Certification: | CE, SGS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR UPRIGHT PROFILE(SIZE CHANGING AUTOMATICALLY) | |
| Material Specification | |
| Thickness | 1.6mm to 2.5mm or customized |
| Size | YX71-115/120/125/130/135 |
| Material | GI |
| Yield strength | G450 or customized |
| Machine Components | |
| 5Ton*600mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil Inner-diameter | 510±30mm |
| Coil width | Max.600mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Pre-leveler and Power Feed-in Device | |
| Power Feed-in Rollers | |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set | |
| Power | 5.5KW |
| 100 Tons Press | |
| Servo motor feed-in device | 3KW |
| Quantity of pressing tools | 5 sets |
| Mateiral of pressing tool | Cr12Mov, heat treatment |
| Holes patten | Customized |
| Roll Forming Machine | |
| Driving system | Toroidal worm box |
| Forming station | 22 stations |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Shafts Diameter | Φ75mm |
| Servo motor to drive | 18.5KW |
| Motor for size changing | 1.5KW |
| Production speed | Approx. 8m/min to 10m/min |
| Hydraulic Non-Stop Cutting device | |
| Cutting type | Non-stop cut, no blanking cut |
| Unloading and cutting carriage reset | Driving by pneumatic cylinder |
| Quantity of cutting tools | 5 sets |
| Cutting tool material | Cr12, heat treatment |
| Hydraulci pump motor | 11KW |
| Air souce supply | By user |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±1mm |
| Punching tolerance | ≤±1 mm |
| Control Voltage | 24V |
| Product Rack | Un-powered, 6 meters |
| Option | Pneumatic unloading rack |
){kind=link}