| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR L ANGLE | |
| Material Specification | |
| Thickness | 3.2mm |
| Size | 96/71/58mm |
| Material | GI, Hot rolled steel |
| Yield strength | 250~400Mpa |
| Machine Components | |
| 5Ton*600mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max.1600mm |
| Coil width | Max.600mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Pre-leveling Device | |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set, Manual control | |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 8 stages |
| Shaping device | 5 rollers for shaping |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Option for roller material | Cr12Mov |
| Shafts Diameter | Φ75mm |
| Motor to drive | 11KW |
| Speed | Approx. 20m/min |
| Hydraulic Post Cutting Device | |
| Cutting type | No blanking cut |
| Cutting tool material | Cr12, Heat treatment |
| Hydraulic station | 7.5KW |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2mm |
| Control Voltage | 24V |
| Product Rack | Un-powered, 3 meters long |
){kind=link}