| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR YX150 HAT PROFILE | |
| Material Specification | |
| Thickness | 2.5mm |
| Feeding width | approx425mm |
| Material | GI, cold rolled steel |
| Yield strength | 235MPa~390MPa |
| Machine Components | |
| Hydraulic Pre-leveling Device, Pre-shearing device and Pre-punching device | |
| Pre-Level Device with 5 shafts to remove the Coil-set, Manual control | |
| Function of pre-shearing devic | Smart cut control, to cut off the end of the final piece of sheet only |
| Cutting blade material | Cr12, heat treatment |
| Quantity of punching moulds | 5 sets |
| Punching mould material | Cr12Mov, heat treatment |
| Servo motor | 5KW |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 18 stages |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Shafts Diameter | Φ75mm, 40Cr, tempered and quenched |
| Servo motor to drive | 18.5KW |
| Speed | Approx. 8m/min |
| Hydraulic Post Cutting Device | |
| Cutting type | Slug breaker |
| Cutting tool material | Cr12Mov, Heat treatment |
| Hydraulic station | 11KW |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm |
| Control Voltage | 24V |
| Product Rack | Un-powered, 6 meters long |
| End flare Shaping Device | |
| Hydraulic station | 3KW |
| Length | 4 meters long |
| With small electric cabinet | |
){kind=link}