| Customization: | Available |
|---|---|
| Tile Type: | Gi, PPGI, Aluminum,Stainless Steel,Colored Steel |
| Certification: | CE, SGS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR BOXBEAM PROFILE | |
| Drawing | |
| Material Specification | |
| Thickness | 1.4mm to 1.6mm |
| Size | 83.5/93.5/103.5/123.5/138.5mm or customized |
| Material | GI, cold rolled steel |
| Yield strength | Q235MPa |
| Machine Components | |
| 5Ton*650mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil Inner-diameter | 510±30mm |
| Coil width | Max.650mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Pre-leveling Device | |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set, Manual control | |
| Hydraulic Pre-shearing device | |
| Function of pre-shearing devic | Smart cut control, to cut off the end of the final piece of sheet only |
| Cutting blade material | Cr12, heat treatment |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 16 stations |
| Roller material | Cr12Mov,heat treatment, HRC58~62 |
| Option for roller material | Cr12 |
| Shafts Diameter | Φ75mm |
| Motor to drive | 15KW, frequency speed control |
| Size changing | By spacer |
| Line speed of rollformer | Approx. 12m/min or customized |
| Hydraulic Cutting Device | |
| Cutting type | slug breaker |
| Cutting blade material | Cr12Mov,heat treatment, HRC58~62 |
| Hydraulic pump motor | 7.5KW |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm |
| Control Voltage | 24V |
| Product Rack | un-powered, 6 meters long |
| Adjustable Interlock Device | |
| Forming station | 5 stations |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Main motor | 3KW |
| Size changing | By spacer |
| Electrical control box | 1 unit |
| Product Rack | un-powered, 6 meters long |
){kind=link}