| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR 8MM U PROFILE(SIZE CHANGING AUTOMATICALLY) | |
| Material Specification | |
| Thickness | 6mm to 8mm |
| Web | 266mm to 320mm or customized |
| Flange | 95mm to 100mm or customized |
| Feeding width | 432mm~508mm |
| Material | Hot rolled steel |
| Yield strength | 250MPa to 550MPa |
| Machine Components | |
| 5Ton*600mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 4KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max.1600mm |
| Coil width | Max.600mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Pneumatic Shoveling Device | |
| Material head shoveling device to drive the feed-in table, air source provied by the user | |
| Power Feed-in Device | |
| Driving system | Gear/sprocket |
| Motor | 7.5KW |
| Stations to feed in | 4 |
| Lifting of the upper shafts | Controlled pneumatically |
| Pre-leveling Device | |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set, Manual control | |
| Hydraulic Pre-shearing device | |
| Function of pre-shearing devic | Smart cut control, to cut off the end of the final piece of sheet,cut to length control, manual clutch to assit |
| Cutting blade material | Cr12Mov, heat treatment |
| Spraying cooling system for cutting blade | 1 unit |
| Hydraulic pump motor | 15KW |
| Roll Forming Machine | |
| Driving system | Toroidal worm box |
| Forming station | 20 stations |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Option for roller material | Cr12Mov |
| Shafts Diameter | Φ105~110mm |
| Servo motor to drive | 22KW×2 |
| Motor for size changing | 2.2KW |
| Line speed of rollformer | Approx. 10m/min or customized |
| Spraying cooling system | Between certain stations |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±1 mm |
| Punching tolerance | ≤±1 mm |
| Control Voltage | 24V |
| Product Rack | 3 meters×2 |
){kind=link}