Customization: | Available |
---|---|
Tile Type: | Gi, PPGI, Aluminum,Stainless Steel,Colored Steel |
Certification: | CE, SGS |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
ROLL FORMING MACHINE FOR YX29.5-285.5-1142 ROOF PROFILE | |
Drawing | |
Material Specification | |
Thickness | 0.35mm to 0.8mm |
Effective width | 1142+/-10mm |
Feeding width | Approx.1335mm |
Material | Aluzinc |
Yield strength | 235-550MPa |
Machine Components | |
5Ton*1250mm Hydraulic Decoiler | |
Coil inner hole expanding | Hydraulic system, 3KW pump motor |
Speed regulating | Frequency inverter, 3KW motor |
Expanding type | Taper wedge expanding system |
Load capacity | Max.5Tons |
Coil inner diameter | 510±30mm |
Coil outer diameter | Max.1600mm |
Coil width | Max.1250mm |
Stop/start rotation | Automatic stopping device with limited switch to assist |
Option | Please refer to decoiler on home page |
Entry Rollers and Manual Pre-shearing Device | |
Working thickness | Up to 0.8mm |
Function | Smart cut control, to cut off the end of the final piece of sheet only |
Option | Hydraulic pre-shearing device |
Roll Forming Machine | |
Driving system | Gear/sprocket |
Option for driving system | Gear box or toroidal worm box |
Polythene Film-On Device | Un-powered, with un-coil-rollers at double sides, with rubber shaft to film-on the film |
Forming station | 20 stations |
Roller material | 45# steel, CNC lathes, hard chrome coated |
Option for roller material | Cr12, Cr12Mov |
Shafts Diameter | Φ95mm |
Main motor | 15KW |
Line speed of rollformer | Approx. 20m/min or customized |
Hydraulic Cutting Device | |
Cutting type | No Blanking cut |
Cutting tool material | Cr12, heat treatment |
Hydraulci pump motor | 5KW |
PLC Control System | |
Function | Control the quantity & cutting length automatically |
PLC | Siemens |
Touch screen | Siemens |
Inverter | Schneider |
Encoder | Omron |
Cut-to-length tolerance | ≤±2 mm or customized |
Control Voltage | 24V |
Product Rack | Un-powered, three units |
Option | Please refer to Stacker on home page |