| Warranty: | 12 Months |
|---|---|
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
| Certification: | CE, SGS |
| Condition: | New |
| Customized: | Customized |
| Usage: | Roof |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | CZ INTERCHANGEABLE MACHINE | |
| Material Specification | |
| Thickness | |
| Web | 100mm to 300mm or customized |
| Flange | 40mm to 100mm or customized |
| Lip | 10mm to 31.5mm or customized |
| Material | GI, cold rolled steel |
| Yield strength | 235MPa |
| Machine Components | |
| 5Ton*600mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max.1600mm |
| Coil width | Max.600mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Pre-leveling Device | |
| Pre-Level Device with 4 over 3 shafts to remove the Coil-set, Manual control | |
| Hydraulic Pre-shearing device and Pre-punching device | |
| Function of pre-shearing devic | Smart cut control, to cut off the end of the final piece of sheet only |
| Cutting blade material | Cr12, heat treatment |
| Punching tool material | Cr12, heat treatment |
| Holes | 4-Φ18,2-3-Φ18,6-Φ18,2-3-Φ18,2-Φ18 or customized |
| Hydraulic pump motor | 15KW |
| Roll Forming Machine | |
| Driving system | Gear/sprocket |
| Forming station | 15 stations |
| Roller material | Cr12, heat treatment, HRC58~62 |
| Option for roller material | Cr12Mov |
| Shafts Diameter | Φ60mm |
| Servo motor to drive | 22KW |
| Motor for size changing | 1.5KW×1+0.75KW×2 |
| Line speed of rollformer | Approx. 25m/min or customized |
| PLC Control System | |
| Function | Control quantity, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±1 mm |
| Punching tolerance | ≤±1 mm |
| Control Voltage | 24V |
| Product Rack | 4 meters×1 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}