| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Tile Type: | Gi, PPGI, Aluminum, Stainless Steel, Colored Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ROLL FORMING MACHINE FOR CONTAINER ROOF PART | |
| Material Specification | |
| Thickness | 0.5mm~1.2mm |
| Material | GI |
| Yield strength | 345MPa |
| Machine Components | |
| 2Ton*300mm Simple Decoiler | |
| Type | No power |
| Load capacity | Max.2Tons |
| Coil Inner-diameter | 510±30mm |
| Coil width | Max.300mm |
| Coil Outer-diameter | Max.1500mm |
| Roll Forming Machine | |
| Driving system | Gear/Sprocket driving |
| Wall plate thickness | 18mm |
| Forming stages | 10 stages |
| Roller material | GCr15, heat treatment, HRC58~62, hard chrome coated, some rollers are with bearing |
| Shafts Diameter | Φ75mm |
| Motor to drive | 7.5KW, frequency speed control |
| Line speed of rollformer | Approx. 15m/min |
| Hydraulic Post-Notching, Post Punching & Cutting Device | |
| Quantity of notching mould | One set |
| Quantity of punching mould | One set, to punch Φ6 hole |
| Quantity of intergrated punching and cutting mould | One set |
| Notching, punching & cutting moulds material | Cr12Mov, heat treatment |
| Hydraulci pump motor | 5.5KW |
| PLC Control System | |
| Function | Control quantity, notching, punching and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2mm |
| Control Voltage | 24V |
| Product Rack | Un-powered, 6 meters long |
){kind=link}